Table of Contents
Advertisement
Installation
Step
System prompt
4
You will next have to enter the
nfs pathname to the backup
image.
The format is
backuphostip:/path/systemname.D
mmddyyThhmmss.full
Where:
backuphostip is the ip address
of the system where the backup
file is located.
path is the pathname to the
directory on the backuphost
where backup file is located.
systemname is the host name of
the system that back up was
created from.
There should be two files on
the backuphost:
systemname.DmmddyyThhmmss.full
and
systemname.DmmddyyThhmmss.diski
nfo.
Enter the nfs pathname to the
backup image now.
5
Configuring default router
Set default network router IP
address [y,n,?]
6
Set Router IP Address (ex.
192.1.7.254 ):
7
Is router address <192.1.7.254>
correct [y,n,?]
64 Avaya IR R1.2 Installation
Action
Enter the NFS pathname to the backup file.
CAUTION:
You must use the IP address of the system
where the backup is located (backuphostip). If
you use a host name instead, the restore
operation may fail depending on your network
configuration.
The system extracts the data from the backup
file, install the data, then reboots. This process
takes several minutes.
Enter Y for Yes.
Enter the IP address of the router.
Enter Y for Yes if the router address is correct.
Advertisement
Table of Contents
