Automatic Status Information Codes - Denon DN-700R Serial Command Protocol Manual

Automatic Status Information Codes

In the event that a change is made to DN-700R from the device itself, DN-700R may automatically send
status information to the host. See below for the status information codes that can be automatically
sent to the host.
CATEGORY
USB
SD1
Media Selection
SD2
Network
SD Card In
SD Card Out
SD Card Error
Media Status
Unformatted SD Card
Write Protected SD
Card
SD Card Door Opened @0CDDO\r
Recording
Recording Paused
DIR Unlocked
Playing
Paused
Repeat Paused
Rewinding
Device Status
Fast Forwarding
Stopped
Cued
Autocueing
Timer Standby
Loading
Busy
File List Opening
44
Automatic Status Information
(Host → DN-700R)
CONTENTS
@0MEUS\r
@0MES1\r
@0MES2\r
@0MENE\r
@0CDCI\r
@0CDNC\r
@0CDCE\r
@0CDUF\r
@0CDWP\r
@0STRE\r
@0STRP\r
@0STRU\r
@0STPL\r
@0STPP\r
@0STPR\r
@0STRW\r
@0STFF\r
@0STST\r
@0STCU\r
@0STAC\r
@0STSH\r
@0STLD\r
@0STBY\r
@0STFL\r
CODE
The USB drive was selected as the current media
source
SD Card 1 was selected as the current media
source
SD Card 2 was selected as the current media
source
The network was selected as the current media
source
An SD card was inserted into one of the SD slots
The SD card was ejected
There was an error with the SD card
An unformatted SD card was inserted into one of
the SD slots
A write protected SD card was inserted into one of
the SD slots
The SD slot door was opened
A recording was started
The current recording was paused
With the recording audio source set to one of the
digital inputs, the digital interface receiver was
unlocked
Playback of the current track was initiated
The current track was paused
The current track was paused (and the repeat
feature is activated)
The current track is being rewound
The current track is being fast forwarded
The current tracklist was stopped
A track was cued
A track was autocued
Pre-scheduled recording or playback was
automatically initiated
DN-700R is currently loading
DN-700R is currently busy
The file list was opened
DESCRIPTION