Denon DN-700R Serial Command Protocol Manual page 21

Hide thumbs Also See for DN-700R:
Table of Contents

Advertisement

CATEGORY
Change Network
Network Settings
Standby Setting
Set Date and Time
Set Time Zone
Observe/Don't Observe
Daylight Savings
Adjust Daylight Savings
Time Offset
Set Daylight Savings
Start Date
Clock/Display
Settings
Set Daylight Savings End
Date
Set Time Format
Set Time Notation
Set Date Format
Screen Saver On/Off
Dimmer On/Off
Control Commands
(Host → DN-700R)
CONTENTS
@0NsNN\r
@0DtYYMMDD
hhmm\r
@0TZxHHMM
@0dSNN\r
@0dohhmm\r
@0dsMMDDhh
mm\r
@0deMMDDhh
mm\r
@0TDXXX\r
@0TFNN\r
@0DFXX\r
@0SsNN\r
@0DMNN\r
CODE
Sets whether DN-700R can be controlled from
the network while it is in standby, where NN (the
setting) = 00 (can be controlled) or 01 (can't be
controlled)
Sets the date and time on DN-700R, where
YYMMDD (the year, month, and day) = 130101–
351231 and hhmm (the time in hours:minutes) =
0000–2359
Sets the time zone on DN-700R, where x (the
offset direction) and HHMM (the offset amount in
hours and minutes) = -1200 – +1400; +0000 is
GMT
Note: the offset amount can only be adjusted in
fifteen minute increments
Determines whether DN-700R will observe
daylight savings in tracking the time, where NN =
00 (observe daylight savings) or 01 (don't
observe daylight savings)
Adjust the daylight savings time offset, where
hhmm (hours:minutes) = 0000–0600
Note: this setting can only be adjusted in fifteen
minute increments
Sets the date and time when daylight savings
will be applied, where MMDD (the month and
day) = 0101–1231 and hhmm (the time in hours
and minutes) = 0000–2359
Sets the date and time when daylight savings
will end, where MMDD (the month and day) =
0101–1231 and hhmm (the time in hours and
minutes) = 0000–2359
Determines how the time will be shown on DN-
700R's display screen, where XXX (the time
format) = HMS (shown in
hours:minutes:seconds) or MSF (shown in
minutes:seconds:frames)
Adjust the time notation setting for the display
screen, where NN (the setting) = 12 (12-hour
AM/PM clock) or 24 (24-hour clock)
Determines how the date will be shown on the
display screen, where XX (the date format) = MD
(month/day/year), DM (day/month/year), or YM
(year/month/day)
Activates or deactivates the screen saver that
appears on the display screen after 30 minutes
of inactivity, where NN = 00 (turn screen saver
on) or 01 (turn screen saver off)
Activates or deactivates the dimmer for the
Display screen and LED's, where NN = 00 (turn
dimmer on) or 01 (turn dimmer off)
DESCRIPTION
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents