Denon DN-700R Serial Command Protocol Manual page 19

CATEGORY
Editing and
Organizing
Rename File (4 digit)
Tracks/
Recordings
Lower/Raise Output
Level
Advanced Audio
Set Audio Output Rate
Settings
Switch to Mono
Set Reference Level
Set Archive Server IP
Create FTP (Archive)
Server User Name
Create FTP (Archive)
Network Settings
Server Password
Set FTP (Archive) Server
Folder
Assign IP Address
Control Commands
(Host → DN-700R)
CONTENTS
@0RNnnnnXXX
X\r
@0OtXYNN\r
@0dFXX\r
@0MONN\r
@0FrNN\r
@0Aixxxx\r
@0Auxxxx\r
@0Apxxxx\r
@0Aoxxxx\r
@0Ipxxxx\r
CODE
Renames the file, where nnnn (the file number) =
0001–2000 and XXXX stands for a file name no
longer than 251 characters (absolute path not
required)
See Appendix > Acceptable Characters for
Serial Communication
characters can be used in the file's new name
Adjusts the analog output volume level for either
the left or right channel, where X = L (for the left
channel) or R (for the right channel) and YNN
(the volume adjustment in multiples of 0.1 dB) =
-20 – +20
For example, to increase the volume of the left
channel by 1.5 dB, enter this code: @0ltL+15
Sets the audio output sample rate, where XX =
AT (automatic: sample rate will match that of the
audio input source/file), 44 (sample rate will be
set to 44.1 kHz), 48 (sample rate will be set to 48
kHz), EX (sample rate will be set using an
external clock for the digital signal)
Sets the audio output to mono-summed or to
match the input source, where NN = 00 (mono)
or 01 (match the input source)
Adjusts the reference level, where NN = 24 (+24
dBu for XLR / +10 dBv for RCA), 20 (+20 dBu for
XLR / +6 dBv for RCA), or 18 (+18 dBu for XLR /
+4 dBv for RCA)
Sets the IP address for network archiving, where
xxxx stands for the IP address (omitting periods)
Creates a user name for the archive network,
where xxxx stands for a user name of up to 255
characters
See Appendix > Acceptable Characters for
Serial Communication
characters can be used in the user name
Creates a password for the archive network,
where xxxx stands for a password of up to 12
characters
See Appendix > Acceptable Characters for
Serial Communication
characters can be used in the password
Sets the network folder to which archived files
will be automatically saved, where xxxx stands
for the folder name (absolute path required)
Assigns a static IP address to DN-700R, where
xxxx stands for the IP address (omitting periods);
enter AUTO00000000 for the xxxx variable to set
DN-700R to be automatically assigned its IP
address
DESCRIPTION
for details on which
for details on which
for details on which
19