Denon DN-700R Serial Command Protocol Manual page 8

CATEGORY
Left Channel Volume
Up/Down
Right Channel Volume
Up/Down
Adjust L/R balance
Recording
Adjust Pre-Record Time @0PRNS\r
Set Format to PCM
Set Format to MP3
Select Current Folder
Select Specific Folder
Dual Record On/Off
Advanced
Recording
Options
Relay Record On/Off
8
Control Commands
(Host → DN-700R)
CONTENTS
@023LX\r
@023RX\r
@023BX\r
@0AFPMNN\r
@0AFM3NNN\r
@0RfCU\r
@0RfFXxxxx\r
@0dRXX\r
@0rRXX\r
CODE
Adjusts the volume of the left recording channel
up or down 1.0 dB, where X (the direction) = +
(up) or - (down)
Adjusts the volume of the right recording
channel up or down 1.0 dB, where X (the
direction) = + (up) or - (down)
Adjusts the balance of the left and right
recording channels, where X = L (increase the
volume of the left channel by 1.0 dB and
decrease the volume of the right channel by 1.0
dB) or R (increase the volume of the right
channel by 1.0 dB and decrease the volume of
the left channel by 1.0 dB)
Sets the amount of time it will take DN-700R to
begin recording after the record command is
executed, where N (the amount of time in
seconds) = 1–5; if no variable is entered in the
command, the pre-record time feature will be
disactivated
Sets the file format for recordings to PCM and
sets the file bit length, where NN stands for the
bit length
Sets the file format for recordings to MP3 and
sets the file bit rate, where NNN (the bit rate in
Kbps) = 064, 128, 192, 256, or 320
Sets the currently selected folder as the
destination for saving new recorded files
Sets a specified folder as the destination for
saving new recorded files, where xxxx stands for
the folder name (absolute path not required)
Activates/deactivates dual recording and selects
the backup media, where XX = OF (turns dual
recording off), S1 (turns dual recording on and
selects SD Card 1 as the backup media), S2
(turns dual recording on and selects SD Card 2
as the backup media), or US (turns dual
recording on and selects USB as the backup
media)
Activates/deactivates relay recording and
selects the secondary media, where XX = OF
(turns relay recording off), S1 (turns relay
recording on and selects SD1 as the secondary
media), S2 (turns relay recording on and selects
SD Card 2 as the secondary media) or US (turns
relay recording on and selects USB as the
secondary media)
DESCRIPTION