Appendix; Acceptable Characters For Serial Communication - Denon DN-700R Serial Command Protocol Manual

Hide thumbs Also See for DN-700R:

Table of Contents

Appendix

The table below lists all the characters that are allowed in serial communication between the host and

DN-700R. Use this table to determine which characters are acceptable for command codes requiring

you to create a name (such as a folder or file name).

NBSP

Note: For the "Create Admin Password," "Create Operator Password," and "Create Observer

Password" control commands (@0PDxxxx), the acceptable characters for the xxxx variable are only

those between 0x21 and 0x7E (with the further exception of 0x3A).

Note: For the "Create FTP (Archive) Server User Name" and "Create FTP (Archive) Server Password"

control commands, the acceptable characters for the xxxx variable are only those between 0x20 and

0x7E (with the further exceptions of 0x3A and 0x22).

Note: For the "Edit Machine Name" control command (@0MNxxxx), the acceptable characters for the

xxxx variable are only those which are alphanumeric, 0x2D, and 0x5F.

(

)

XA XB XC XD XE

;

[

]

{

}

DEL

Table of Contents

Show Quick Links

Table of Contents