Denon DN-700R Serial Command Protocol Manual page 22

CATEGORY
Set Display Brightness
Set LED Brightness
Set Contrast
Clock/Display
Settings
Set Display Language
Set Hot Start Mode for
the Parallel Input
Set Fader Start Type for
Other Settings
Parallel Input
22
Control Commands
(Host → DN-700R)
CONTENTS
@0DDNN\r
@0LDNN\r
@0BNnn\r
@0LNXX\r
@0PAXX\r
@0FDXX\r
CODE
Adjusts the brightness of the Display screen,
where NN (the brightness setting) = 00 (100%),
01 (75%), 02 (50%), 03 (25%), or 04 (0%)
Adjusts the brightness of the LEDs, where NN
(the brightness setting) = 00 (100%), 01 (75%),
02 (50%), or 03 (25%)
Adjusts the contrast of the display screen, where
nn (the contrast setting) = 01–05
Changes the language for folder and file names
shown on the display screen, where XX (the
language) = US (English) or JP (Japanese)
Note: Executing this command will cause DN-
700R to reboot
Sets whether a parallel remote in Hot Start Mode
will play selected hot start tracks or only cue
them, where XX (the setting) = HT (play selected
hot start tracks) or HC (cue selected hot start
tracks)
Determines the function of the fader start pin for
the parallel remote (pin #9 in Normal Mode),
where XX is one of the following:
• PL (Play: plays the current track when the pin
is closed)
• PU (Play/Pause: plays the current track when
the pin is closed; pauses the current track
when the pin is opened)
• NE (Play/Next: plays the current track when
the pin is closed; skips to the next track when
the pin is opened)
• LO (Play+Lock: plays the current track when
the pin is closed; locks the front panel keys
when the pin is opened)
• LP (Play+Lock/Pause: plays the current track
and locks the front panel keys when the pin is
closed; pauses the current track when the pin
is opened)
• LN (Play+Lock/Next: plays the current track
and locks the front panel keys when the pin is
closed; skips to the next track when the pin is
opened)
• SP (Start/Pause: initiates recording or play the
current track when the pin is closed; pauses
recording or playback when the pin is opened)
• ST (Start/Pause/Track: initiates recording
when the pin is closed while no recording is in
progress; pauses the recording when the pin
is opened while currently recording; initiates
recording to a new file when the pin is closed
while the current recording is paused
• MT (Manual Track: Initiates recording to a
new file when the pin is closed while the
current recording is paused)
DESCRIPTION