Denon DN-700R Serial Command Protocol Manual page 12

CATEGORY
Lower/Raise Input Level @0ItXYNN\r
Set Recording Input
Routing (Signal Pass
Thru)
Change Rec Level Type
Advanced
Recording
Options
Change Auto Level
Control (ALC) Type
Set XLR Voltage Level
Set XLR Mic Input
Sensitivity
Turn Phantom Power
On/Off
Play
Pause
Stop
Track Playback
Hot Start Play
12
Control Commands
(Host → DN-700R)
CONTENTS
@0SpNN\r
@0RlXX\r
@0RLXX\r
@0LMXNN\r
@0MsXNN\r
@0PhXYY\r
@02353\r
@02348\r
@02354\r
@0HPnn\r
CODE
Adjusts the analog input volume level for either
the left or right channel, where X = L (for the left
channel) or R (for the right channel) and YNN
(the volume adjustment in multiples of 0.1 dB) =
-20 – +20
For example, to increase the volume of the left
channel by 1.5 dB, enter this code: @0ltL+15
Sets the recording input signal to be routed
through the audio outputs, where NN (the
setting) = 00 (route the recording input signal
through the audio outputs) or 01 (don't route the
recording input signal through the audio outputs)
Changes the function of the record level knob on
the front panel, where XX (the function) = MA
(the record level knob will primarily adjust the
volume level of the left and right channels; while
shift is engaged, the record level knob will adjust
the balance of the left and right channels) or LR
(the record level knob will primarily adjust the
volume level of the left channel; while shift is
engaged, the record level knob will adjust the
volume level of the right channel)
Determines the function of the Auto Level
Control (ALC) feature, where XX = MA (turns off
ALC), SE (separate: ALC is applied to the left
and right recording channels individually), or MI
(mixed: ALC is applied equally to the left and
right recording channels)
Sets the XLR input channel to line or mic level,
where X = L (for the left channel) or R (for the
right channel) and NN (the voltage level) = LN
(line) or MC (mic)
Adjust the mic input sensitivity for the XLR input,
where X = L (for the left channel) or R (for the
right channel) and NN (the mic input sensitivity
level in –dBu) = 16–60
Turns phantom power on or off for the XLR
input, where X = L (for the left channel) or R (for
the right channel) and YY = 00 (phantom power
on) or 01 (phantom power off)
Note: When the XLR input is set to line level,
phantom power will be turned off automatically
Plays the current track
Pauses the current track
Stops the current tracklist
Plays the track assigned the entered hot start
number, where nn (the hot start number) = 01–
20
DESCRIPTION