Denon DN-700R Serial Command Protocol Manual page 10

CATEGORY
Rename User Area
Add/Remove User Area
in Recorded File Name
Format
Set Timer (by day of the
week)
Advanced
Recording
Options
Set Timer (by specific
date and time)
Timer Off
Delete Timer Setting
10
Control Commands
(Host → DN-700R)
CONTENTS
@0Uaxxxx\r
@0USNN\r
@0ShDWXXxxx
xxxxHHMMhhm
mUUUUU\r
@0ShDTXXYYM
MDDHHMMhh
mmUUUUU\r
@023TO\r
@0ShDLNN\r
CODE
Edits the user area character string to be
automatically included in recorded file names,
where xxxx stands for a user area name of up to
32 characters
See Appendix > Acceptable Characters for
Serial Communication
characters can be used in the user area's new
name
Sets recorded file names to automatically
include or not include the user area name, where
NN (the setting) = 00 (include) or 01 (don't
include)
Sets DN-700R to automatically start recording at
a specific day and time:
• XX (the record timer setting number) = 01–30
• xxxxxxx (the day or days of the week) =
SMTWTFS and/or _; see note below for
details
• HHMM (the start time in hours and minutes) =
0000–2359
• hhmm (the duration of the recording in hours
and minutes) = 0000–2359
• UUUUU stands for a user area name of up to
32 characters
Note: For the xxxxxxx variable, an entry must be
made for all seven days of the week; if you
would like to skip a day of the week, enter _
instead of the first letter of the day name; for
example, to set the recording only on Monday,
Wednesday and Friday, enter _M_W_F_ for
xxxxxxx
Note: If you want to set the recording to start
every hour, enter ** for the HH variable
Sets DN-700R to automatically start recording at
a specific date and time:
• XX (the record timer setting number) = 01–30
• YYMMDD (the year, month, and date to start
recording) = 130101–351231
• HHMM (the start time in hours and minutes) =
0000–2359
• hhmm (the duration of the recording in hours
and minutes) = 0000–2359
• UUUUU stands for a user area name of up to
32 characters
Note: To set the recording to occur annually,
enter ** for the YY variable; to set the recording
to occur monthly, enter ** for the MM variable
Turns the record timer(s) off
Deletes the timer assigned to the timer setting
number, where NN (the timer setting number) =
01–30
DESCRIPTION
for details on which