Denon DN-700R Serial Command Protocol Manual page 27

Status Request Commands
(Host → DN-700R)
REQUEST
Recording
@0?IN\r
Audio Input
One Touch
@0?OR\r
Recording
Status
Pre-Record
@0?PR\r
Setting
Recording
@0?Rf\r
Folder
Remaining
@0?RT\r
Record Time
Recording
@0?RV\r
Volume
Recording
@0?VI\r
Volume Type
Record Monitor
@0?Rm\r
Setting
Auto Track
@0?AT\r
Time
Status Information
(DN-700R → Host)
CODE ANSWER
AES/EBU
On
Off
Off
On
Current
Fixed
Amount of
available
recording time
The recording
volume
Fixed
Variable
On
Off
Auto track time
interval setting
CODE
The recording audio source is set to the
@0INDB\r
AES/EBU input
@0OR00\r One Touch Recording is turned on
@0OR01\r One Touch Recording is turned off
@0PR\r The pre-record timer is turned off
The pre-record timer is turned on, where
n (the length of the timer in seconds) =
@0PRnS\r
1–5
DN-700R is set to save new recordings
@0RfCU\r
to the currently selected folder
DN-700R is set to save new recordings
@0RfFXXXXX\r to a specific folder, where XXXX stands
for the name of the folder
The estimated amount of time that DN-
700R can record to the currently
selected media source before the media
source runs out of space, where
@0RThhhmmss\r
hhhmmss (the amount of time in hours,
minutes, and seconds) = 0000001–
9995959
The recording volume, where LL stands
for the left channel volume rounded to
@0RVLLRR\r the nearest one and RR stands for the
right channel volume rounded to the
nearest one
The recording input volume is fixed at 0
@0VIFX\r
dB
The recording input volume can be
@0VIVA\r
adjusted
The record monitor feature is currently
@0Rm00\r
set to on
The record monitor feature is currently
@0Rm01\r
set to off
The time interval in which DN-700R is
set to split in-progress recordings when
the auto-track feature is activated,
where hhmm (the length of time in hours
and minutes) = 0001, 0005, 0010, 0015,
@0AThhmm\r
0030, 0100, 0200, 0600, 0800, 1200, or
2400; DN-700R will answer with 0000
for the variable if the auto track feature
is disactivated
DESCRIPTION
27