Denon DN-700R Serial Command Protocol Manual page 45

CATEGORY
Main Menu Opening
Device Status
Error
Track Change
Folder Change
File/Folder
Selection
Total Track Number
Change
Total Folder Number
Error Device Error
Automatic Status Information
(Host → DN-700R)
CONTENTS
@0STED\r
@0STER\r
@TrNNNN\r
@0SFXXXX\r
@0TtNNNN\r
@0TfNNNN\r
@0ERnnxxxx\r
CODE
The main menu was opened
There is an operation error
The current track was changed, where NNNN (the
file number for the newly selected track) = 0001–
2000
The currently selected folder was changed, where
XXXX stands for the name of the newly selected
folder
The total number of tracks in the currently selected
folder was changed, where NNNN (the new number
of tracks in the currently selected folder) = 0001–
2000
The total number of folders within the currently
selected folder on the current media source was
changed, where NNNN (the new number of folders)
= 0000–2000
There is an error with the device, where xxxx stands
for the error code and nn (the number of seconds
that the error will be shown on the display screen) =
01–99; if 00 is shown for the nn variable, the display
will show the error until the error is resolved
DESCRIPTION
45