Denon DN-700R Serial Command Protocol Manual page 26

Status Request Commands
(Host → DN-700R)
REQUEST
Media Size @0?SF\r
Media Free
@0?FE\r
Space
Device Status @0?ST\r
Search Speed @0?SP\r
Recording
@0?IN\r
Audio Input
26
Status Information
(DN-700R → Host)
CODE ANSWER
Total capacity
of the media
drive
SD Card 1
SD Card 2
USB drive
Playing
A-B repeat
Paused
Paused (with
repeat on)
Stopped
Cued
Autocueing
Rewinding
Fast forwarding @0STFF\r
Loading
Busy
File list open
Menu open
Timer standby
Error
Speed value
Unbalanced
Balanced
Coaxial
CODE
The total capacity of the currently
selected media source, where mm (the
@0FEmmXXXX\r media source) = S1 (SD Card 1), S2 (SD
Card 2), or US (USB) and XXXX stands
for the capacity
The amount of free space left on SD
@0FES1XXXX Card 1, where XXXX stands for the free
space left
The amount of free space left on SD
@0FES2XXXX Card 2, where XXXX stands for the free
space left
The amount of free space left on the
@0FEUSXXXX USB drive, where XXXX stands for the
free space left
@0STPL\r The current track is playing
The current track is playing (with the A-
@0STAB\r
B repeat feature activated)
@0STPP\r The current track is paused
The current track is paused (with the
@0STPR\r
repeat feature is activated)
@0STST\r The current tracklist is stopped
@0STCU\r A track is currently cued
@0STAC\r A track is currently autocued
@0STRW\r The current track is rewinding
The current track is fast forwarding
@0STLD\r DN-700R is currently loading
@0STBY\r DN-700R is currently busy
@0STFL\r The file list is currently open
@0STED\r The menu settings are currently open
Pre-scheduled recording or playback is
@0STSH\r
currently in progress
@0STER\r There is an operation error
The direction in and speed at which the
track is searching, where X (the
direction) = R (rewinding) or F (fast-
@0SPXnnn\r
forwarding) and nnn (the speed) = 002
(2x), 010 (10x), 050 (50x), 100 (100x), or
200 (200x)
The recording audio source is set to the
@0INUB\r
RCA inputs
The recording audio source is set to the
@0INBA\r
analog XLR inputs
The recording audio source is set to the
@0INDI\r
coaxial input
DESCRIPTION