Denon DN-700R Serial Command Protocol Manual page 13

CATEGORY
Set Playback Range
Set Playback Mode
Turn Repeat On/Off
Track Playback
Turn Random On/Off
Turn Program List
On/Off
Set Finish Mode
Set Fade In Time
Set Fade Out Time
Advanced
Set Playback Delay
Playback
Options
Set EOM Time
Autocue On/Off
Control Commands
(Host → DN-700R)
CONTENTS
@0PrXX\r
@0PMXX\r
@0RENN\r
@0RNnn\r
@0PGNN\r
@0FMXX\r
@0FInn\r
@0FOnn\r
@0sDnnn\r
@0EDnn\r
@0ACNN\r
CODE
Selects the tracks to be included in the current
tracklist, where XX (the setting) = AL (all tracks in
all folders on the current media source) or FD
(only the tracks in the currently selected folder
on the current media source)
Sets how DN-700R will cycle through the current
tracklist, where XX (the setting) = SP (play one
track in the current tracklist and then stop
playback) or CN (continuously play through the
tracks in the current tracklist)
Activates or deactivates the repeat feature,
where NN = 00 (turn repeat on) or 01 (turn repeat
off)
Activates or deactivates random playback for
the current tracklist, where nn = 00 (turn random
on) or 01 (turn random off)
Activates playback of the pre-programmed
tracklist, where NN = 00 (turn program list on) or
01 (turn program list off)
Sets the playback status when the stop
command is executed, where XX (the setting) =
ST (stop: the current tracklist will stop), NT (next
track: the next track in the tracklist will be cued),
RC (recue: DN-700R will skip to the point at
which playback was previously started)
Determines how long a track will fade in when
playback is initiated, where nn (the length of the
fade) = 00 (off/no fade in), 05 (500 milliseconds),
10 (1 second), or 30 (3 seconds)
Determines how long a track will fade out before
playback ends, where nn (the length of the fade)
= 00 (off/no fade out), 05 (500 milliseconds), 10
(1 second), or 30 (3 seconds)
Determines how long of a delay there will be
after track playback is initiated, where nnn (the
length of the delay) = 000 (off/no delay), 010 (100
milliseconds), 020 (200 milliseconds), or 030
(300 milliseconds)
Sets how long before the end of a track it will
take before the "End of Message" icon displays,
where nn (the length of time in seconds) = 00,
05, 10, 15, 20, 30, 60, or OF (turns the EOM
feature off)
Sets the DN-700R to skip audio in the beginning
of tracks that is below a specific volume
threshold, where NN (the volume threshold in
–dB) = 36, 42, or 48; if 00 is entered, the autocue
function will be deactivated
DESCRIPTION
13