Denon DN-700R Serial Command Protocol Manual page 29

Status Request Commands
(Host → DN-700R)
REQUEST
Auto Deletion
@0?AD\r
Setting
Record Channel
@0?CH\r
Setting
Recording File
@0?AF\r
Format
Recording
@0FSNN\r
Sample Rate
File Name
@0?Ff\r
Format
Status Information
(DN-700R → Host)
CODE ANSWER
Off
On
Stereo
Mono (L)
Mono mixed
PCM
MP3
Current sample
rate setting
MN_DT_UA
MN_UA_DT
DT_MN_UA
DT_UA_MN
UA_MN_DT
CODE
DN-700R is not set to automatically
delete archived files when the available
@0ADOF\r memory on the current media source
becomes limited to a specified amount
of record time
DN-700R is set to automatically delete
archived files when the available
memory on the current media source
becomes limited to a specified amount
@0ADHH\r
of record time, where HH (the record
time in hours) = 01, 03, 06, 12, or 24;
enter OF for HH to deactivate the auto
delete feature
@0CHST\r DN-700R is set to record stereo files
DN-700R is set to record left-channel
@0CHML\r
mono files
DN-700R is set to record mono-mixed
@0CHMX\r
files
The file format for recordings is set to
@0AFPMnn\r
PCM, where nn stands for the bit rate
The file format for recordings is set to
@0AFM3nnn\r MP3, where nnn (the bit rate in Kbps) =
064, 128, 192, 256, or 320
The current setting for the recording
sample rate, where NN (the sample rate)
@0FSNN\r
= 44, 48, 96 or EX (for the AES/EBU
input)
The file name format for recorded files is
set to include the machine name first,
@0FfMDU\r
then the date, then the user area (if
applicable)
The file name format for recorded files is
set to include the machine name first,
@0FfMUD\r
then the user area (if applicable), then
the date
The file name format for recorded files is
set to include the date first, then the
@0FfDMU\r
machine name, then the user area (if
applicable)
The file name format for recorded files is
set to include date first, then the user
@0FfDUM\r
area (if applicable), then the machine
name
The file name format for recorded files is
set to include the user area first (if
@0FfUMD\r
applicable), then the machine name,
then the date
DESCRIPTION
29