Rt (Radio Text); Switching Rds Information Display - Denon TU-1800DAB Operating Instructions Manual

Operation

RT (Radio Text)

1
Press the
2
Either turn the
press the
display "RDS".
3
Press the
button to set the RDS search selection mode.
4
Either turn the
press the
display "RT ON/OFF".
5
Press the
button to set the RT ON/OFF selection mode.
6
Either turn the
CHANNEL/CONTROL
the
"RT ON" or "RT OFF".
7
Press the
button to set whether to enable or stop the
RADIO TEXT function.
If no text data is being broadcast, "NO TEXT DATA" is
displayed.
Downloaded from www.Manualslib.com
MENU DISPLAY
TUNING/PRESET
MENU
button to select menu.
TUNING/PRESET
CHANNEL/CONTROL
TUNING/PRESET
knob or
TUNING/PRESET
CHANNEL/CONTROL
TUNING/PRESET
knob or
TUNING/PRESET
button to choose the
TUNING/PRESET
knob or
manuals search engine
MENU
DISPLAY

Switching RDS information display

1 Use the procedure described at "Auto tuning",
"Manual tuning" or "Recalling preset stations"
to tune in a frequency with an RDS station.
knob or
2
Press the
button to
reception information.
The display switches as shown below each time the
ENTER
DISPLAY button is pressed.
q STATION NAME :
knob or
button to
w PS :
ENTER
knob, press
e PTY :
ENTER
r CT :
• When the "STATION NAME" is not registered, q is not
displayed.
16
DISPLAY
button to switch the RDS
Only displayed when the search mode is set to
PRESET and the station name has been registered.
The programme service name and frequency of the
station tuned in is displayed.
The above is an example for when there is TP
data but no RT data.
The programme type of the tuned in broadcast is
displayed.
The current time is displayed.
CHANNEL/
CONTROL
ENTER