Kemper 475plus Operator's Manual page 80

NOTE: Install cleaners (D) and (E) with their cutting
edges facing in the direction of cut.
Tighten all attaching screws of blade segments and
cleaners with the specified torque.
Specification
M8 screws—Torque ........................................................................28 Nm
M10 screws—Torque ......................................................................51 Nm
A—M8 screws
Service
20.65 lb-ft
37.62 lb-ft
B—M10 screws
55-5
KM00321,0000149 -19-26MAR09-2/3
KM00321,0000149 -19-26MAR09-3/3
040519
PN=80