3. Screw threaded rod (B) into u.j. shaft, adjust to 225
mm (8.86 in.) (X) and counterlock with hex. nut (A).
A—Hex. Nut
B—Threaded Rod
4. Insert the u.j. shaft into header drive (A) on the forage
harvester.
5. Secure the u.j. shaft to the rear of the header drive
using washer (C) and lock nut (B).
6. Put the other end of the u.j. shaft on the rotary
harvesting unit gear box (D).
A—Header Drive
B—Lock Nut
Attaching to a CLAAS Forage Harvester
X—225 mm (8.86 in.)
C—Washer
D—Gear Box
25-15
Continued on next page
KM00321,00003D8 -19-13MAR15-3/8
KM00321,00003D8 -19-13MAR15-4/8
040519
PN=40