Kemper 475plus Operator's Manual page 29

A—Adapter cable
IMPORTANT: Perform this step only for rotary
harvesting units that have been equipped for
attachment of a support wheel at the factory.
NOTE: Rotary harvesting units that have not been
equipped for attachment of a support wheel at
the factory have no adapter cable (A).
Attaching to a CLAAS Forage Harvester
B—Main wire harness connector
25-4
8. The adapter cable (A) must be removed from the
Claas control unit (C) when the programming is
complete. To do so, proceed as follows:
•
Remove adapter cable (A).
•
Insert connector (B) of the main wiring harness
directly to the Claas control unit.
KM00321,00008F3 -19-14MAR19-5/5
040519
PN=29