7. Engage locking screw (A) into groove of splined shaft.
Make sure that u.j. shaft can no longer move.
Tighten lock nut (B).
A—Locking Screw
8. Pre-assemble the bracket and install it on the header
drive of the forage harvester.
A—Shaft
B—Spring
C—Curved Spring Washer
Attaching to a CLAAS Forage Harvester
B—Lock Nut
D—Washer
E—Snap Ring
25-16
Continued on next page
KM00321,00003D8 -19-13MAR15-5/8
KM00321,00003D8 -19-13MAR15-6/8
040519
PN=41