Kemper 475plus Operator's Manual page 28

IMPORTANT: The following entries must be
released by Claas.
5. Use the old Orbis types when selecting the type of
machine.
NOTE: For example, in the case of an Orbis 900, select
type 992 and not type I53 (see illustration).
6. Depending on the model of the mower attachment,
select following settings:
Rotary harvesting unit
model
345plus
360plus/460plus without
chassis
360plus/460plus with chassis
375plus/475plus without
chassis
375plus/475plus with chassis
390plus/490plus without
chassis
390plus/490plus with chassis
IMPORTANT: Additionally, select the setting
"variable drive" for each type.
7. Shift the multi speed gearbox (A) on the cutting
attachment in the 3. gear (see Adjusting Gear
Selection with Multi Speed Gearbox for CLAAS
Forage Harvesters in the section Operating the
Rotary Harvesting Unit).
A—Multi-Speed Transmission
Attaching to a CLAAS Forage Harvester
Machine type
Orbis 450
Orbis 600
Orbis 750
Orbis 750
Orbis 750
Orbis 900
Orbis 900
Continued on next page
25-3
Transmission
3 speed transmission
3 speed transmission
3 speed transmission
3 speed transmission
3 speed transmission
3 speed transmission
3 speed transmission
Transport system
No transport system
No transport system
Transport wagon
No transport system
Transport wagon
No transport system
Transport wagon
KM00321,00008F3 -19-14MAR19-3/5
KM00321,00008F3 -19-14MAR19-4/5
040519
PN=28