Tactical Group Function; TactCal Group FunctOn - Icom IC-F9020 Series Operating Manual

n Tactical Group function
The Tactcal Group functon enables commonly used chan-
nels to be placed together n zone 128.
IMPORTANT!
The tactcal group operaton should be enabled by your
dealer wth the CS-F9010/F9510
your dealer for detals.
Non-dsplay types can be operated only as the sub trans-
cever.
D Creating the tactical group in zone 128
— Individual channel copy
q Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select the channel whch you wsh to copy to zone 128,
then turn power OFF.
w For Handheld types:
Whle pushng [I] and [III], rotate [VOL] to turn power ON.
For Mobile types:
Whle pushng [P1] and [P3], push [
• "COPY ?" s dsplayed.
• When all 512 channels are already used, the transcever has no
capacty. "NOT COPY" s dsplayed for 2 sec. and error beeps
sound.
• Turn power OFF to cancel copy.
e Push [ Ω ] or [P0]
(for Handhelds)
lected channel to zone 128.
• "COPIED" s dsplayed.

TACTICAL GROUP FUNCTION

. Ask
cloning software
] to turn power ON.
to copy the se-
(for Mobles)
D Creating the tactical group in zone 128
— Zone copy
q Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select the channel belongng to the zone whch you wsh
to copy to zone 128, then turn power OFF.
w For Handheld types:
Whle pushng [I] and [III], rotate [VOL] to turn power ON.
For Mobile types:
Whle pushng [P1] and [P3], push [
ON.
• "COPY ?" s dsplayed.
• When all 512 channels are already used, the transcever has no
capacty. "NOT COPY" s dsplayed for 2 sec. and error beeps
are emtted.
• Turn power OFF to cancel copy.
e Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select "ZONE COPY ?".
r Push [ Ω ] or [P0]
(for Handhelds)
lected zone data to zone 128.
• "COPIED" s dsplayed.
NOTE:
When the transcever has not enough capacty to create
the tactcal group wth zone copy, all channel data may not
be coped completely.
4
] to turn power
to copy the se-
(for Mobles)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
44