RadO Check FunctOn - Icom IC-F9020 Series Operating Manual

3
APCO P25 MODE OPERATION
n Radio Check function
D Transmitting
A Rado Check functon allows an operator to know f the tar-
get staton s wthn communcaton range.
The target staton transcever automatcally responds after
recevng a rado check sgnal.
[Digital Button] key assgnment s necessary to transmt the
rado check sgnal.
Not avalable on Non-dsplay types n the Conventonal
mode.
✔ For Trunking mode operation:
Ths functon s avalable only for a dspatcher n the Trunkng
mode.
q Push [Digital Button] to enter the dgtal call type selec-
ton mode.
w Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select "RDO CHECK."
For Handheld types:
RDO CHECK
DSEL PAGE
27
For Mobile types:
R D O C H E C K
STAT
e Push [Digital Button] agan to enter the Indvdual ID se-
lecton mode.
• A pre-programmed ID name s dsplayed.
• When the ID name s not programmed, the ID code s ds-
played.
For Handheld types:
RDO CHECK
INDIVIDUAL1
DSEL PAGE STAT
r Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select the desred ID (or name).
• Push and hold [Digital Button] for 1 sec. to cancel and return to
normal operaton.
• The ID can be edted wth the 10-keypad*. (Dependng on the
pre-settng.) See p. 16 for edtng detals.
* 10-key types only.
For Mobile types:
R D O C H E C K
I N D I V I D U A L 1