Icom IC-F9020 Series Operating Manual page 21

D Receiving
q When a Talkgroup call s receved;
• The Busy/Transmt ndcator (for Handhelds) or Busy ndcator
(for Mobles) lghts green.
• The rnger sounds. (Dependng on the pre-settng.)
• The Talkgroup ID (or name) and callng staton ID (or name) are
dsplayed for 2 sec. (Dependng on the pre-settng.)
"ALL CALL" s dsplayed nstead of the Talkgroup ID (or name)
when All Call s receved.
• Dependng on the pre-settng, the transcever does not open the
squelch, and communcaton s not establshed, f the Talkgroup
ID or NAC (Network Access Code) s not matched. Ask your
dealer for detals.
For Handheld types:
TG:1
INDIVIDUAL1
INDV TGID SET
w Push and hold [PTT] and speak nto the mcrophone.
NOTE: Only one staton s permtted to speak at a tme.
e Release [PTT] to receve a response.
NOTE: When the Talkgroup ID s set to '65535,' any Talk-
group call can be receved (f NAC s matched). Ask your
dealer for detals.
For Mobile types:
The talkgroup ID
T G : 1
I N D I V I D U A L 1
The calling station name (or ID)
APCO P25 MODE OPERATION
D Talkgroup display on mode change
The Talkgroup ID (or name) s dsplayed for 2 sec. on the
upper lne of the LCD when the operatng channel or zone s
changed.
Ths functon can be turned OFF by your dealer.
D Talkgroup display on PTT
The Talkgroup ID (or name) s dsplayed for 2 sec. on the
upper lne of the LCD when [PTT] s pushed.
Ths functon can be turned OFF by your dealer.
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18