Ds-7600Ni Series; Ir Remote Control Operations; Pairing (Enabling) The Ir Remote To A Specific Device (Optional) - HIKVISION DS-9600NI-I8 Series User Manual

DS-7600NI Series

No. Name
1 POWER
2 HDD
3 Tx/Rx
4 USB Interface

IR Remote Control Operations

The device may also be controlled with the included IR remote control, shown in Figure 1-5.
Batteries (2×AAA) must be installed before operation.
The IR remote is set at the factory to control the device (using default Device ID# 255) without any
additional steps. Device ID# 255 is the default universal device identification number shared by the
devices. You may also pair an IR Remote to a specific device by changing the Device ID#, as follows:
Pairing (Enabling) the IR Remote to a Specific Device
(optional)
You can pair an IR Remote to a specific device by creating a user-defined Device ID#. This feature is
useful when using multiple IR Remotes and devices.
On the device:
Go to System > General.
Type a number (255 digits maximum) into the Device No. field.
On the IR Remote:
Network Video Recorder User Manual
DS-7600NI Series
Panel Description
Connections
Turns green when device is powered up.
Flickers red when data is being read from or written to HDD.
Flickers blue when network connection is functioning
properly.
Universal Serial Bus (USB) port for additional devices such as
USB mouse and USB Hard Disk Drive (HDD).
25