Configure Live View Settings
Live View settings can be customized. You can configure the output interface, dwell time for
screen to be shown, mute or turning on the audio, the screen number for each channel, etc.
Go to System > Live View > General.
Configure the Live View parameters.
Video Output Interface: Select the video output to configure.
Live View Mode: Select the display mode for Live View, e.g., 2*2, 1*5, etc.
Dwell Time: The time in seconds to wait between switching of cameras when using auto-switch
in Live View.
Enable Audio Output: Enable/disable audio output for the selected video output.
Volume: Adjust the Live View volume, playback and two-way audio for the selected output
interface.
Event Output: Select the output to show event video.
Full Screen Monitoring Dwell Time: Set the time in seconds to show alarm event screen.
Click OK.
Configure Live View Layout
Configure Custom Live View Layout
Go to System > Live View > View.
Click Set Custom Layout.
Click
on the Custom Layout Configuration interface.
Edit the layout name.
Network Video Recorder User Manual
Live View-General
62