Device With A Single Network Interface - HIKVISION DS-9600NI-I8 Series User Manual

 Check Enable DHCP to obtain IP settings automatically if a DHCP server is available on the
network.
 Valid MTU value range is 500 to 9676.
Click Apply.

Device with a Single Network Interface

Go to System > Network > TCP/IP.
Configure network parameters as needed.
 Check Enable DHCP to obtain IP settings automatically if a DHCP server is available on the
network.
 Valid MTU value range is 500 to 9676.
Click Apply.
Network Video Recorder User Manual
TCP/IP Settings
156