Configure Snmp - HIKVISION DS-9600NI-I8 Series User Manual

Network Video Recorder User Manual
Connection to a network time protocol (NTP) server can be configured on your device to ensure
the system's date and time accuracy.
Go to System > Network > TCP/IP > NTP.
NTP Settings
Check Enable.
Configure NTP settings as need.
 Interval (min): Time interval between two time synchronization with NTP server
 NTP Server: IP address of the NTP server
 NTP Port: Port of the NTP server
Click Apply.

Configure SNMP

Purpose
You can configure SNMP settings to get device status and parameter information.
Before You Start
Download the SNMP software to receive device information via the SNMP port. By setting the trap
address and port, the device is allowed to send alarm events and exception messages to the
surveillance center.
Go to System > Network > Advanced > SNMP.
159