Unpacking The Machine - Pacific S-20 Parts & Operating Manual

2. UNPACKING THE MACHINE

NOTE: Use a ramp with no more than a 12° incline when loading or unloading the machine
1. Remove the outer packaging
2. Remove the four cleats and two tie down brackets holding the machine to the pallet
3. Raise the scrub head into the transport position.
4. Use a suitable ramp or platform and carefully pull the machine backwards down from the pallet
3. TRANSPORTING THE MACHINE
CAUTION: Remove the batteries and get assistance before lifting the machine manually.
NOTE: Use a ramp with no more than a 12° incline when loading or unloading the machine.
NOTE: Turn power off and put the scrub head in the lowered position during transport.
NOTE: Do not rest the orbital head on a hard surface without a pad. Doing so damages the Mighty-Lok® face.
TIE DOWN PROCEDURE
The S-Series Scrubber was designed for easy transport on a route cleaning program. Two options are available
for tying the machine down to a truck or trailer during transport.
Tie down holes are located on both
RETURN TO
TABLE OF
CONTENTS
sides of the main frame
Run tie down straps between the
recovery tank and solution tank
5