Pacific S-20 Parts & Operating Manual page 56

S-20 ORBITAL WIRING DIAGRAM
RETURN TO
TABLE OF
CONTENTS
***AFTER SERIAL NUMBER 113191***
Wires represented with dashed lines indicate optional equipment installation
TROUBLESHOOTING TIPS
1. If the scrub head is not working when
lowered, be aware that BatteryShield®
intentionally disables the scrub head
when the batteries need water. Refer to
the BATTERYSHIELD® AUTOMATIC
WET BATTERY PROTECTION
SYSTEM section of this manual.
2. For machines equipped with
BatteryShield® refer to the
BATTERYSHIELD® (OPTIONAL)
WIRING DIAGRAM and
BATTERYSHIELD® AUTOMATIC
WET BATTERY PROTECTION
SYSTEM section prior to proceeding.
3. If a yellow LED is flashing on the
battery charger, verify continuity
between the charger and the battery
pack. Refer to the ON-BOARD
CHARGER section of this manual.
4. A circuit breaker is designed to prevent
overloading a component/system. If a
circuit breaker continues to trip, verify
the system is not being overloaded or
that a wire is not chaffed creating a
short-circuit.