Head Lift - Pacific S-20 Parts & Operating Manual

INSPECTION & CLEANING
NOTE: If excessive debris is present, drain and flush the solution tank.
1. Close the shutoff valve.
2. Remove the filter bowl and screen.
3. Clean and rinse any debris in the filter assembly.

HEAD LIFT

• Depress the foot lever (located at the lower right rear corner of the machine) and shift it to the right.
• Once clear of the notch, allow the lever to rise while the head lowers into the operating position.
• Disk machines are equipped with a self-adjusting shroud and bristle skirt that virtually eliminates over-
spray.
SELECTING DOWN PRESSURE
1. Standard: For daily cleaning of normal soils.
2. Heavy: For toughest soils or chemical-free finish removal.
LOWER SCRUB
HEAD
RETURN TO
TABLE OF
CONTENTS
9. SCRUB DECK SETUP
STANDARD DOWN
PRESSURE
17
HEAVY DOWN
PRESSURE