Pacific S-20 Parts & Operating Manual page 13

SETTING THE CHARGER ON MACHINES PURCHASED WITHOUT BATTERIES
Configure the charging profile to the type of batteries installed on the machine. Switch banks SW1 and SW2
are located behind the label on the lower right corner of the charger next to the green LED.
SW2: Set the charge current according to the battery amp hour rate
(Reference CHARGE CURRENT AND BATTERY AMP
HOURS table below).
DP2 DP1 CHARGING CURRENT
ON ON 15A
ON OFF 20A
OFF ON 25A
OFF OFF 25A
SW1: Set the current profile according to the battery installed.
DP2 DP1 CHARGING CURRENT
OFF ON Lead-Acid (Wet) Batteries
OFF OFF AGM FULLRIVER
ON OFF AGM DISCOVER
ON ON Gel
CHARGING CURRENT
15A
20A
25A
RETURN TO
TABLE OF
CONTENTS
BATTERY AMP HOUR RANGE
(5h)
100-150 Ah
120-195 Ah
180-258 Ah
12
(20h)
130-180 Ah
150-240 Ah
220-315 Ah