Pacific S-20 Parts & Operating Manual page 23

CLEAN & INSPECT
1. Inspect both squeegee blades. If the blade edges are not clearly
defined or are worn halfway through the thickness of the blade, flip
the blades to another edge or replace as required.
2. Thoroughly clean and rinse the underside of the
squeegee frame, blades and neck.
REMOVE & INSTALL SQUEEGEE BLADES
1. Release the over-center latch and slide the band clamp off the hook on the other side.
2. Blades can be flipped length wise or top to bottom to utilize another blade edge.
3. Blade installation is the reverse of the removal.
RETURN TO
TABLE OF
CONTENTS
22