PAD/BRUSH ASSIST BATTERY POWER LEVEL INDICATOR
Pad/brush assist models have a Power Level Indicator that uses seven LEDs to communicate
the level of charge in the batteries. When the LED starts to flash, the brush motor will shut
down but the vacuum will still recover water.
NOTE: The Power Level Indicator will display the lowest level indicated and will not reset until a full charge
has been applied. If the meter does not reset, diagnose the health of the batteries and the charger.
7. DRIVE SYSTEM (TRACTION MODELS)
DRIVING OPERATION
1. Bail: Squeezing the Bail activates solution flow, the brush motor, and traction drive.
2. Speed Control: Rotate the Speed Control with either thumb.
•
Clockwise: Faster
•
Counter-Clockwise: Slower
3. Reverse Button: Depress Reverse Button and squeeze Bail for reverse operation.
RETURN TO
TABLE OF
CONTENTS
1
2
15
3