Base Plan, Static Load And Weights; Figure 3: Base Plan - AEG Fluxpower HE Series Installation And Start-Up Manual

18

3.3.1 BASE PLAN, STATIC LOAD AND WEIGHTS

Figure 3: Base plan

Power (kVA)
L1 (mm)
P1 (mm)
L2 (mm)
The supporting base of the UPS must be designed to carry the UPS weight
and to ensure its steady and safe support.
Its carrying capacity must be adequate for the static loads indicated in the
table below.
Power (kVA)
Weight without battery (kg)
Weight with battery (max) (kg)
Static load without battery (kg/m
Static load with battery (max) (kg/m
10 15
10 15
100
285
2
347
)
2
989
)
20 30 40
Three phase
450
640
–
20 30 40
Three phase
110 140
275 –
381 486
954 –