RECEIPT OF THE UPS
Please inspect the device before installing it. In case any damage is noticed
from the conditions of the package and/or from the outside appearance of
the equipment, contact the shipping company or your dealer immediately.
The damage statement must be made within 6 days of receipt of the product
and must be notified to the shipping carrier directly. Should the product need
to be returned to the manufacturer, please use the original packaging.
DANGER TO PERSONS DUE TO TRANSPORTATION DAMAGE
Mechanical damage to the electrical components constitutes a serious danger
to persons and property. In case of doubt regarding the non-integrity of the
packaging or of the product contained therein, contact the manufacturer before
carrying out the installation and/or the start-up.
The package normally ensures protection from humidity and possible
damages during transport. Do not store the UPS outdoors.
RISK OF DAMAGE DUE TO INAPPROPRIATE STORAGE
For the environmental storage conditions, refer to the indications given for
the installation of the device.
The device must only be stored in rooms protected from dust and humidity.
The device cannot be stored outdoors.
HANDLING OF THE UPS
The UPS is packed on a pallet. It is handled from the transport vehicle to the
installation (or storage) place via a fork lift.
THE DEVICE IS HEAVY
Avoid turnover during the transport of the UPS.
Cabinets must always be handled in upright position.
During loading and unloading operations, always respect the indications
regarding the device "right way up" orientation marked on the packaging.
Before positioning the UPS, and in order to avoid risk of turnover,
it's recommended to move the system on the wood pallet on which the
UPS is fixed.
Before positioning in its final location, remove the UPS from the pallet.