Installation - AEG Fluxpower HE Series Installation And Start-Up Manual

2.3.4 INSTALLATION

The product must be installed in strict compliance with the instructions
contained in the technical back-up documentation, including the present safety
instructions. In particular, the following points must be taken into account:
The product must be placed on a base suitable for carrying its weight and
•
that ensures a vertical position;
The UPS must be installed in a room with restricted access, according to
•
standard IEC EN62040-1-2;
Never install the equipment near liquids or in an excessively damp
•
environment;
Never let a liquid or foreign body penetrate inside the device;
•
Never block the ventilation grates;
•
Never expose the device to direct sunlight or place it near a source of heat.
•
SPECIAL ENVIRONMENTAL CONDITIONS
Fluxpower HE is designed for normal climatic and environmental operating
conditions as defined in the technical specification: altitude, ambient operating
temperature, relative humidity and environmental transport and storage
conditions. It is necessary to implement specific protective measures in case of
unusual conditions:
harmful smoke, dust, abrasive dust;
•
humidity, vapor, salt air, bad weather or dripping;
•
explosive dust and gas mixture;
•
extreme temperature variations;
•
bad ventilation;
•
conductive or radiant heat from other sources;
•
strong electromagnetic fields;
•
radioactive levels higher than those of the natural environment;
•
fungus, insects, vermin.
•
USE AUTHORIZED PERSONNEL ONLY
All transport, installation and start-up operations must be carried out by
qualified and trained personnel.
The installation of Fluxpower HE must be carried out by authorized personnel,
in compliance with national and local regulations.
11