Download  Print this page

Special Safety Warnings; General Warnings; Personnel; Transport And Handling - AEG Fluxpower HE Series Installation And Start-Up Manual

Hide thumbs

Advertisement

10
2.3

SPECIAL SAFETY WARNINGS

2.3.1 GENERAL WARNINGS

Fluxpower HE is provided with various stickers with indications regarding
specific dangers. These stickers must always be well visible and replaced
in cases where they are damaged. The present documentation must always
be available in proximity to the device. In case of loss we recommend to
request a copy from the manufacturer, whose details are available in the
"Contacts" section.

2.3.2 PERSONNEL

Any operation on Fluxpower HE must be carried out by qualified personnel.
By qualified and trained person we mean someone skilled in assembling,
installing, starting up and checking the correct operation of the product,
who is qualified to perform his/her job and has entirely read and understood
this manual, especially the part regarding safety. Such training and
qualification shall be considered as such, only when certified by the
manufacturer.

2.3.3 TRANSPORT AND HANDLING

Avoid bending or deforming the components and altering the insulation
distances while transporting and handling the product.
UNDISTRIBUTED WEIGHT
The weight of the UPS is not uniformly distributed. Pay attention when lifting.
Please inspect the device before installing it. In case any damage is observed
from the conditions of the package and/or from the outside appearance of the
equipment, contact the shipping company or your dealer immediately. The
damage statement must be made within 6 days of receipt of the product and
must be notified to the shipping carrier directly. Should the product need to be
returned to the manufacturer, please use the original package.
INJURY HAZARD DUE TO MECHANICAL DAMAGE
Mechanical damage to the electrical components constitutes a serious danger
to persons and property. In case of doubt regarding the non-integrity of the
package or of the product contained therein, contact the manufacturer before
carrying out the installation and/or the start-up.

Advertisement

loading