Download  Print this page

Fuses Positioning Bcb - Fluxpower He 10-15-20 Kva; Figure 14: Fuses Positioning On The Fuse Holder Bcb - AEG Fluxpower HE Series Installation And Start-Up Manual

Hide thumbs

Advertisement

36
4.4
FUSES POSITIONING BCB –
FLUXPOWER HE 10-15-20 KVA
After that the batteries are correctly connected, insert the fuses and the
auxiliary contact on the fuse holder (BCB), as shown in the Figure 15.

Figure 14: Fuses positioning on the fuse holder BCB

BATTERY VOLTAGE
After battery installation, before closing BCB, check the battery voltage on
the BCB circuit breaker.
In case of not directly supplied cabling, please connect the cables to the
battery breaker (BCB) as shown in the Figure below.

Advertisement

loading