Point Of Installation - AEG Protect C.3000 Operating Instructions Manual

84
Please keep the plastic packaging bags away from babies and
children in order to safeguard against suffocation accidents.
Handle the components with care. Please take into account the weight. It
may be necessary to engage the help of a second person, particularly in
the case of the 2 and 3 kVA models and if there are external battery
units.
4.2

POINT OF INSTALLATION

PROTECT C is designed to be installed in a protected environment.
When installing the unit, pay attention to such factors as sufficient
ventilation and suitable ambient conditions.
PROTECT C is air-cooled. Do not obstruct the air vents!
The UPS and in particular its external battery modules should preferably
be operated at room temperature (between 15 °C and 25 °C).
Install the units in a room that is dry, relatively dust-free and free of
chemical vapours.
Make sure that no magnetic storage media are stored and / or
operated close to PROTECT C.
Check the type rating plate to make sure the voltage and frequency data
correspond to the values applicable to your loads.