Table of Contents
Advertisement
18
3.3 Point of installation
UPS unit
To keep air-flowing freely, it is recommended to keep a clearance with
500mm space both for front and rear side.
1. Place the unit on a flat, stable surface in its final location,
2. Install 'Stabilizer bracket' (optional): remove side's screw from the unit,
then install 'Stabilizer bracket' to the unit.
3. Install the unit to a surface (optional): place 4pcs bolts (M8 is
recommended) to the final location previously, bolt's position please refer
to below, then fix the unit to the bolts
Advertisement
Table of Contents
