Point Of Installation - AEG PROTECT C Series User Manual

7
EN
Please keep the plastic packaging bags away from babies and children in order to
safeguard against su ocation accidents.
Handle the components with care. Please take into account the weight. It may be
necessary to engage the help of a second person, particularly in the case of the 2 and
3 kVA models and if there are external battery units.

.2 POINT OF INSTALLATION

PROTECT C is designed to be installed in a protected environment. When installing
the unit, pay attention to such factors as su icient ventilation and suitable ambient
conditions.
PROTECT C is air-cooled. Do not obstruct the air vents! The UPS and in particular its
external battery modules should preferably be operated at room temperature
(between 15 °C and 25 °C). Install the units in a room that is dry, relatively dust-free
and free of chemical vapours.
Make sure that no magnetic storage media are stored and / or operated close to
PROTECT C.
Check the type rating plate to make sure the voltage and frequency data correspond
to the values applicable to your loads.