Paper Jam - Brother HL-2290 Service Manual

4.2.9 Paper jam

 Paper jam at the paper tray
<User Check>
• Check that the paper is set in the paper tray correctly.
• Flip over the paper in the paper tray or rotate the paper 180°.
• Adjust each paper guide according to the paper size.
• Check that there is not too much paper set.
• Check that the thickness of the paper is 60 to 163 g/m
• Flip through the paper and reset it in the paper tray.
Step
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Cause
Foreign object around the paper
tray
Paper dust cleaning roller
attachment failure
Paper feed actuator coming off
Registration front actuator
coming off
Connection failure of the
registration front/rear sensor
harness
Connection failure of the
registration clutch harness
Connection failure of the T1
paper feed sensor harness
(non paper empty sensor models
only)
Connection failure of the T1
paper empty/paper feed sensor
harness
(paper empty sensor models
only)
Registration front sensor failure
T1 paper feed sensor failure
(non paper empty sensor models
only)
T1 paper empty sensor failure
(paper empty sensor models
only)
Paper feed motor failure
Damaged gears in the paper
feed drive system
Damaged fuser unit
Main PCB failure
2
.
Remove the foreign object.
Reattach the paper dust cleaning roller.
Reattach the paper feed actuator.
Reattach the registration front actuator.
Reconnect the registration front/rear
sensor harness.
Reconnect the registration clutch harness.
Reconnect the T1 paper feed sensor
harness.
Reconnect the T1 paper empty/paper feed
sensor harness.
Replace the actuator holder ASSY.
Replace the T1 paper feed sensor PCB
ASSY.
Replace the T1 paper empty/paper feed
sensor PCB ASSY.
Replace the paper feed motor.
Replace the frame L unit.
Replace the fuser unit.
Replace the main PCB ASSY.
2-58
Remedy
Confidential