Brother HL-2290 Service Manual page 46

Error message
Initial display
Print Unable Turn the power off
05 and then back on
again.
Print Unable Turn the power off
09 and then back on
again.
Print Unable Turn the power off
0A and then back on
again.
Print Unable Turn the power off
0B and then back on
again.
Print Unable Turn the power off
2E and then back on
again.
Print Unable Turn the power off
3A and then back on
again.
Print Unable Turn the power off
E0 and then back on
again.
Print Unable Turn the power off
E1 and then back on
again.
Print Unable Turn the power off
E5 and then back on
again.
Print Unable Turn the power off
E6 and then back on
again.
Scroll
Detected the fuser unit
temperature error.
Detected irregular power supply
for more than 100 times.
Detected a fan failure.
An error occurred in the high-
voltage power supply PCB
ASSY while operating.
An error occurred in the high-
voltage power supply PCB
ASSY when the machine was in
the ready state.
Could not communicate with the
cartridge sensor on the machine
side.
A communication error occurred
between the controller and
engine in main PCB.
An error occurred in the ROM
check sum.
Program error
An error occurred during access
to the DRAM in the main PCB
ASSY.
Write error in the EEPROM of
the main PCB ASSY
2-24
Description
Error Refer
codes to:
0501 2-35
0502 2-35
0503 2-35
0504 2-35
0505 2-35
0506 2-35
0508 2-35
050A 2-35
050B 2-35
050C 2-35
0900 2-36
0A02 2-36
0B01 2-37
0B02 2-37
2E00 2-37
3A00 2-37
E000 2-51
E100 2-51
E500 2-51
E600 2-51
Confidential