Brother HL-2290 Service Manual page 239

How to use the drum cleaning sheet
1 Check the group 2
Check that the power of the machine is ON
your machine belongs. and open the front cover.
Check the product model of your
machine and look for it in the list
below to find out the group of
your machine.
Front cover
Group A
DCP-7195DW MFC-7895DW
MFC-L2730DW MFC-L2730DWR
MFC-L2732DW MFC-L2750DW
MFC-L2750DWR MFC-L2750DWXL
3
Follow the instruction according to the group.
MFC-L2751DW MFC-L2770DW
MFC-L2771DW
Group B
Group A
DCP-7090 DCP-7095D
1) Press
DCP-7190DN DCP-B7500D
2) Press
DCP-B7520DW DCP-B7530DN
touch panel.
DCP-B7535DW DCP-L2510D
3) [Drum###%] (# refers to numbers) appears on the LCD.
DCP-L2510DR DCP-L2511D
4) Press and hold
DCP-L2512D DCP-L2530DW
Please refer to the included instruction." appears on the LCD.
DCP-L2530DWR DCP-L2531DW
Group B
DCP-L2532DW DCP-L2535D
DCP-L2535DW DCP-L2536D
1) Press
DCP-L2537DW DCP-L2550DN
2) Press
DCP-L2550DNR DCP-L2550DW
3) Press
DCP-L2551DN DCP-L2551DW
4) Press
DCP-L2552DN MFC-7390
5) Press
MFC-7490D MFC-7890DN
Please refer to the included instruction." appears on the LCD.
MFC-B7700D MFC-B7715DW
MFC-B7720DN MFC-L2690DW
Group C
MFC-L2710DN MFC-L2710DNR
1) Press
MFC-L2710DW MFC-L2710DWR
2) Press
MFC-L2712DN MFC-L2712DW
3) Press
MFC-L2713DW MFC-L2715D
4) Press
MFC-L2715DW MFC-L2716D
Please refer to the included instruction." appears on the LCD.
MFC-L2716DW MFC-L2717DW
HL-L2390DW
Group D
Group C
1) Open the back cover.
2) Press
HL-2590DN HL-2595DW
3) Drum LED and Ready LED flashes in turn.
HL-B2050DN HL-B2080DW
HL-L2325DW HL-L2350DW 4) Close the back cover.
HL-L2350DWR HL-L2351DW
4
HL-L2352DW HL-L2357DW
Remove the drum unit from the machine.
HL-L2370DN HL-L2370DNR
HL-L2370DW HL-L2370DWXL
Toner can be scattered when the drum unit is getting removed from the machine.
HL-L2371DN HL-L2372DN
Prepare a paper which may be stained on the flat surface and place the drum unit on it.
HL-L2375DW HL-L2375DWR Caution
HL-L2376DW HL-L2385DW
HL-L2386DW
Group D
HL-2290 HL-2295D
HL-B2000D HL-L2310D
HL-L2310DR HL-L2312D
HL-L2330D HL-L2331D
HL-L2335D HL-L2336D
to release the error.
> [All setting] > [Machine Info.] > [Parts life] in this order on the
, and release as soon as "Attached the cleaning sheet.
.
to display [Machine Info] on the LCD and press
to display [Parts life] on the LCD and press .
again. [Remaining###%] (# refers to numbers) appears on the LCD.
and at the same time. "Attached the cleaning sheet.
to display [Machine Info] on the LCD and press
to display [Parts life] on the LCD and press .
again. [Remaining###%] (# refers to numbers) appears on the LCD.
and at the same time. "Attached the cleaning sheet.
five times.
Drum unit
Precaution for use: The drum cleaning sheet is supposed to be used only one time.
5
Attach the drum cleaning sheet on the
drum unit.
Drum cleaning sheet
Small round holes
Elliptic holes
Tab
Tapered edge
.
Small round holes
.
Tab
Depressed part
5-55
6
Attach the drum unit on the machine.
Drum unit
7 Cleaning starts automatically once
the front cover is closed.
(Back side of the drum unit)
1) Turn the drum unit
upside down and place
it as shown in the
figure on the left.
2) Insert the drum
cleaning sheet into the
drum unit. Check that
the tapered edge of the
drum cleaning sheet is
at the right bottom. "Drum cleaning" appears on the LCD during the cleaning.
* Not displayed for machines in Group D.
3) Push the elliptic holes
of the drum cleaning
Drum cleaning takes about a minute.
sheet onto the guides
Rasping sound comes out from the machine during the
Note
of the drum unit so that
cleaning but it's not faulty.
the small round holes
Once the cleaning starts, it does not stop until the cleaning
of the drum cleaning
completes successfully.
Caution
sheet are visible.
Even the cleaning stops due to an error, it starts again once
the error gets resolved.
Guides
8
Remove the drum cleaning sheet
from the drum unit.
1) "Drum Cleaning completed." appears on the LCD once
the cleaning completes.
Push in
* For machines in Group D, check that the machine
Push in stopped the cleaning.
Elliptic holes
2) Open the front cover.
3) Remove the drum unit from the machine.
4) Push the tab of the
4) Remove the drum cleaning sheet from the drum unit.
drum cleaning sheet
5) Attach the drum unit without the drum cleaning sheet
onto the depressed
on the machine.
part of the drum unit.
6) Close the front cover.
Always remove the drum cleaning sheet from the drum
unit after the drum cleaning.
Caution
Paper jam error appears if the drum cleaning sheet is not
removed.
Ready
D010SU001
Confidential