Brother HL-B2000D Quick Setup Manual

HL-B2000D
Quick Setup Guide
Operation Videos
www.95105369.com
Installation
& Using
Videos
1
Remove the packing materials and install the drum unit and toner cartridge assembly
2

Load paper in the paper tray

3
Connect the power cord and turn the machine on
Back
Unpack the machine and check the components
Drum Unit
Brother Installation Disc
USB Interface Cable
1
Remove the orange part.
Adjust the paper
guides.
Front
Read the Product Safety Guide first, then read this Quick
Setup Guide for the correct installation procedure.
NOTE:
• Use the appropriate interface cable for the connection you want
to use.
Inbox Toner Cartridge
• The Reference Guide is available on the provided Brother
Installation Disc.
Quick Setup Guide
Product Safety Guide
2
1
Push firmly.
Do not exceed this mark.
Printer LED Indications
Toner Replace Drum End
1
Low Toner Soon
Toner
Yellow/Blinking Yellow/On
Drum
Yellow/Blinking
Paper
Ready
Green/On Green/On
1 The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.
2 The LED will blink ON and OFF at 0.5 second intervals.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Blinking: ON: or
Replace Paper Jam /
2
Drum !
1 2
Drum Cover is Open
Yellow/On Yellow/Blinking
Yellow/Blinking
Green/On
CHN-ENG
Version A
OFF:
No Paper
Yellow/On
1