Brother HL-2290 Service Manual page 157

Table of Contents

Advertisement

 MP models
(1) Release the Registration clutch harness from the securing fixtures.
(2) Remove the Collar 4 to remove the Registration clutch.
Registration clutch harness
(3) Release the T1 clutch harness and the Paper feed sensor harness from the securing
fixtures.
(4) Remove the three Taptite bind B M4x12 screws and the Taptite pan B M4x14 screw to remove
the MP frame parts. Pull out the Paper feed sensor harness and the MP paper empty sensor
harness from the hole of the MP frame parts.
(5) Release the Hook, and remove the T1 clutch.
T1 clutch harness
MP paper empty sensor harness
Harness routing: Refer to
Collar 4
Fig. 3-45
Hook
T1 clutch
Paper feed sensor harness
Fig. 3-46
"5. Frame L unit (MP
3-48
Registration clutch
Taptite bind B M4x12
Hole
models)".
MP frame parts
Taptite pan B
M4x14
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents