Brother HL-2290 Service Manual page 158

Assembling Note:
• When securing the T1 clutch harness and the Registration clutch harness, check that
there is no harness slack.
• Attach the Rotation stopper of the T1 clutch by engaging it with the Pin of the machine
as shown in the figure below.
• Attach the Rotation stopper of the Registration clutch by engaging it with the Protruding
part of the machine as shown in the figure below.
Protruding part
Rotation stopper
Registration clutch
Pin Rotation stopper
Fig. 3-47
3-49
T1 clutch
Confidential