Components
Balancer components include:
•
Display Panel. Shows information about, and lets you control, the Balancer.
•
Hood. Covers the Wheel while it spins.
•
Inner Arm / Distance Ruler. Used to find the distance between the Balancer and the inner
edge of the Wheel being balanced. Not visible in the graphic below.
•
Outer Arm. Used to determine the outer edge of the Wheel being balanced. DST-64T only.
•
Brake Pedal. Used to hold the Wheel where it is.
•
Power Switch. Turns the Balancer on and off.
•
Storage Tray. Storage for Clip-On Weights and other items you want to have handy.
•
Adhesive Weight Dispensers. Hold your Adhesive Weights.
•
Side Storage Rack. Holds items you want to have handy.
•
Cone Hangers. Hold the Mounting Cones when not in use.
•
Anchor Bolt holes. Provided to anchor the Balancer to the ground.
DST-64T shown. DST642D does not have an Outer Arm.
DST-64T / DST642D Wheel Balancers
6
P/N 5900192 — Rev. F — March 2021