Table of Contents
Advertisement
section 23 : CABLE WIRE
Aluminum tube
section 24 : BALANCE & CONTROL SURFACE
Suggested control throws.
Rudder
Seitenruderausschlag
86 ~ 91mm
C of G: Between 86-91mm from the leading edge. For initial
flights keep it towards the 86mm balance point.
IMPORTANT:
Please do not clean your model with pure alcohol, only use liquid soap with water or use glass cleaner
to clean the surface of your model to keep the color and stop fading.
WARNING !
Do not put in a larger than recommended engine, a bigger engine does not necessarily mean better performance.
All details are subject to change
without notice !
cable
50mm
50mm
Technische Anderungen und Irrtumer
vorbehalten !
20
Make up, fit and tension the
rigging wires using the parts
supplied.
Aileron
Querruderausschlag
Elevator
Hohenruderausschlag
Do not try to fly an out-of balance model!
Uberprufen Sie vor dem Flug den Schwerpunkt.
0.7mm dia. Cable
...1 roll
2mm metal tube
....................4
.....2
.....2
20mm
20mm
25mm
25mm
Advertisement
Table of Contents
