Download
Share
Print this page
  1. Manuals
  2. Brands
  3. H-KING Manuals
  4. Toy
  5. Nino
  6. Instruction manual

H-KING Nino Instruction Manual

Epp kit
Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRU CTI O N M A NU AL

Advertisement

loading

Related Manuals for H-KING Nino

Summary of Contents for H-KING Nino

  • Page 1 INSTRU CTI O N M A NU AL...

  • Page 3: Table Of Contents

    Packing list: 1: EPP Nino fuselage *1 2: Carbon tube 4*4*750mm *1 3: Carbon strip 1mm *5 4: Carbon rod 2mm *2 5: Pull rod *4 6: Motor mount *1 7: Quick rod adjuster *4 8: Hinge *4 9: Hook and loop tape *1...

  • Page 4: Motor

    Glue the 2 pcs horizontal fuselages using hot glue sticks. Install the carbon tube on fuselage using foam glue. Install the carbon strip on fuselage using foam glue. Install carbon strip and wood strip on horizontal tail using foam glue. Then wait glue dried. Install 3 pcs different length carbon strips on upper Assemble the vertical fuselage on horizontal fuselage half vertical fuselage using foam glue.
  • Page 5 Install the 3 pcs carbon strips on bottom half vertical Wait glue dried. Then put plane on horizontal desk as fuselage and assemble bottom half vertical fuselage shown picture above. on horizontal fuselage using foam glue. Must check whole fuselage to ensure orthogonality before glue dry.

  • Page 6: Carbon Rod

    Ensure fuselage orthogonality before glue dried. Install the 2 pcs 2mm carbon rod using No.502 glue as shown picture above. Make sure the carbon rod touch the 2pcs carbon strips. Make sure both side unification. Install arm on servo and electrify all servos to make sure the arm perpendicular to servo.

  • Page 7: Pull

    Same way to install fuselage’s servos. Let the 2 Install pull rod on servo and hinge and adjust the servo’s wires in same side. rod’s length. Then tighten the screws. Same way to install hinge. Install wood strip in the hole using No.502 glue or hot glue sticks.

  • Page 8: Hook And Loop

    Assemble motor on the metal cross using screws. Install motor mount on metal cross with 4 pcs Assemble prop on motor. Notice the prop’s direction. m3 screws. Then assemble motor mount on fuselage using hot Put on hook and loop tape on fuselage using foam glue. glue sticks.

  • Page 9: Epp Nino

    Put on hook and loop tape on fuselage using foam glue behind ESC. Then install battery. C of G is on the middle of prop as shown in the EPP Nino looks very Cute and funny when flying, it picture above. will take you a new flying feeling.
  • Page 10 EPP Nino looks very Cute and funny when flying, it will take you a new flying feeling.